Stuart Burgess

De CriaçãoWiki, a enciclopédia da ciência da criação.

Stuart C. Burgess, BSc, PhD(Brun), CEng, FIMechE, é professor de design de engenharia na University of Bristol no Reino Unido. Sua área de pesquisa é o projeto de sistemas mecânicos[1], incluindo o estudo de design na natureza.[2] Professor Stuart Burgess é um criacionista.[3]

Stuart Burgess
Office Room 1.34
Queen's Building
Fone: +44 (0) 117 331 5954
Email: s.c.burgess@bristol.ac.uk

Publicações

Artigos

  • Burgess, SC, Pyper, T & Ling, CS 2013, ‘A linear actuated chain test rig capable of accelerated test speeds and continuous wear measurements’. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol 227., pp. 1047-1055
  • Etoundi, AC, Lock, RJ, Vaidyanathan, R & Burgess, SC 2013, ‘A Bio-inspired Condylar Knee Joint For Knee Prosthetics’. International Journal of Design & Nature and Ecodynamics, vol 8., pp. 213-225
  • Etoundi, AC, Vaidyanathan, R & Burgess, SC 2013, ‘A bio-inspired condylar hinge for robotic limbs’. ASME Journal of Mechanisms and Robotics, vol 5.
  • Tien, TN, Khan, SG, Edwards, C, Herrmann, G, Picco, LM, Harniman, RL, Burgess, SC, Antognozzi, M & Miles, MJ 2013, ‘Estimation of the Shear Force in Transverse Dynamic Force Microscopy Using a Sliding Mode Observer’. in: Proceedings of the 2013 American Control Conference.
  • Evins, RP, Pointer, P, Vaidyanathan, R & Burgess, S 2012, ‘A case study exploring regulated energy use in domestic buildings using design-of-experiments and multi-objective optimisation’. Building and Environment, vol 54., pp. 126 - 136
  • Etoundi, AC, Vaidyanathan, R & Burgess, SC 2012, ‘A bio-inspired condylar knee joint for leg amputees and for knee implants’. in: S Hernandez, CA Brebbia (eds) DESIGN AND NATURE VI: COMPARING DESIGN IN NATURE WITH SCIENCE AND ENGINEERING. WIT Press, SOUTHAMPTON, pp. 23-34
  • Raabe, D, Harrison, A, Ireland, A, Alemzadeh, K, Sandy, J, Dogramadzi, S, Melhuish, C & Burgess, S 2012, ‘Improved single- and multi-contact life-time testing of dental restorative materials using key characteristics of the human masticatory system and a force/position-controlled robotic dental wear simulator’. Bioinspiration & Biomimetics, vol 7., pp. 1 - 17
  • Araromi, OA & Burgess, SC 2012, ‘A finite element approach for modelling multilayer unimorph dielectric elastomer actuators with inhomogeneous layer geometry’. Smart Materials and Structures, vol 21., pp. 1 - 11
  • Lock, R, Vaidyanathan, R & Burgess, S 2012, ‘Design and Experimental Verification of a Biologically Inspired Multi-Modal Wing for Aerial-Aquatic Robotic Vehicles’. in: IEEE International Conference on Biomedical Robotics and Biomechatronics (BIOROB), June 24-27, 2012 Roma, Italy.
  • Burgess, S 2012, ‘Developing an asset management value improvement mo

Livros

  • Burgess, Stuart. He Made the Stars Also: What the Bible Says about the Stars. [S.l.]: Day One Publications, 2001. ISBN 978-1-84625120-7
  • Burgess, Stuart. Hallmarks of Design: Evidence of design in the natural world. 2ª ed. [S.l.]: Day One Publications, 2005. ISBN 978-1-90308731-2
  • Burgess, Stuart. Origin of Man: The image of an ape or the image of God?. [S.l.]: Day One Publications, 2005. ISBN 978-1-90308773-2
  • Burgess, Stuart. In God's Image: The Divine Origins of Humans. [S.l.]: Day One Publications, 2008. ISBN 978-1-84625100-9

Referências

  1. Professor Stuart Burgess. University of Bristol/Faculty of Engineering. Página visitada em 9 de fevereiro de 2014.
  2. Why the Lord’s Day is Important to Me. DayOne incorporating the Lord's Day Observance Society. Página visitada em 10 de fevereiro de 2014.
  3. An evening with Professor Stuart Burgess (16 de outubro de 2011). Página visitada em 9 de fevereiro de 2014.

Ligações externas